Appliance installation prices
Prices below are labour for one appliance in a home in Ho Chi Minh City, where the spot already has a suitable socket, water valve and drain. Parts such as pipes, valves, braided hoses, cable, breakers, sockets, brackets, dryer stacking kits and range hood ducting are listed with quantities and unit prices in your quote before work starts.
Several appliances in one visit are priced per appliance in a single quote. Bulky units on upper floors without a lift, or jobs that need a crane, are quoted separately before booking.
| Appliance | Labour from |
|---|---|
| Top-loading washing machine | from 350,000 VND |
| Front-loading washer or washer-dryer | from 450,000 VND |
| Washer removal and refitting after a move (transport extra) | from 650,000 VND |
| Clothes dryer, floor-standing next to the washer | from 400,000 VND |
| Dryer stacked on the washer with the maker's stacking kit | from 600,000 VND |
| Countertop or freestanding RO water purifier | from 350,000 VND |
| Under-sink RO water purifier | from 450,000 VND |
| Instant (tankless) water heater | from 400,000 VND |
| Storage water heater | from 550,000 VND |
| Wall-mounted or curved-glass range hood | from 450,000 VND |
| Built-in (under-cabinet) range hood | from 550,000 VND |
| Island range hood (ceiling-hung) | from 900,000 VND |
| Built-in induction hob, cut-out already made | from 450,000 VND |
| Cutting a granite or natural-stone worktop for the hob | from 500,000 VND |
| Dedicated cable and breaker for the hob (labour; cable and breaker extra) | from 400,000 VND |
| Freestanding dishwasher | from 450,000 VND |
| Built-in or semi-integrated dishwasher (cabinet ready, door panel fitted) | from 900,000 VND |
| Side-by-side or bottom-freezer fridge: positioning, levelling, test | from 350,000 VND |
| Water line for a fridge with dispenser or ice maker | quoted after a visit (depends on the distance to the water supply) |
| TV wall mounting on brick or concrete (up to 65 in, bracket extra) | see TV mounting prices |
What each appliance needs before installation
Most extra cost comes from a spot that is not ready: no socket, no water valve, a drain in the wrong place or a cabinet that does not fit. Please check the points below against the installation guide that came with your appliance and send photos on WhatsApp +84 773 521 104, so the quote covers labour and parts from the start.
- Washing machine and dryer
- An earthed three-pin socket in a dry spot, not an extension lead; a threaded water valve nearby; a floor drain or standpipe; a level floor that holds the machine on spin. Vented dryers need a route for the duct outside; condenser and heat-pump dryers need a drain or a tank you empty. Stacking is done only when both units are compatible and the maker's kit is used.
- RO water purifier
- A cold-water point (usually the valve under the sink), a drain for RO waste water, a socket for pumped models, enough space in the sink cabinet for under-sink units, and a spot to drill for the tap. Low water pressure needs a pumped model or a booster pump.
- Water heater
- Storage heaters go on brick or concrete: a full 30-litre tank weighs over 40 kg, so never on plasterboard. Hot and cold pipe points, a dedicated breaker with earth-leakage protection and an earth wire are needed. Instant heaters draw a lot of power, often around 4,000–4,500 W, so the circuit must match the rating.
- Range hood
- Mounting height above the hob as the maker specifies; a socket above the hood; a duct route outside sized for the unit, or recirculation with carbon filters. Many apartment buildings do not allow drilling through outside walls, so please check with building management first.
- Induction hob
- A cut-out sized to the model's guide and a ventilated cabinet below with the gaps the maker asks for. Two- and three-zone hobs draw a lot of power and need their own cable of the right size and a dedicated breaker, never a shared socket.
- Dishwasher
- Built-in units need a cabinet of the right width (commonly 45 or 60 cm), height and depth, with room for hoses and cable behind. A water valve, a drain connection under the sink and a dedicated socket in the next cabinet are needed.
- Side-by-side and bottom-freezer fridges
- A delivery route wide enough for the body; side and rear clearance as the maker states; an earthed socket of its own. Dispenser and ice-maker models need a water line with a shut-off valve nearby.
- TV mounting
- Brick or concrete wall; power and signal behind the TV; a bracket matching the VESA pattern and weight. Plasterboard needs fixing into studs or reinforcement first.
Common extra parts and how we quote them
Labour does not include parts. After seeing your photos we list expected parts with quantities and unit prices in the quote; if anything else is needed on the day, the technician stops, tells you and goes ahead only with your approval. You may also buy the parts yourself from our list.
- Pipes, valves, fittings and braided hoses for washers, water heaters and purifiers
- Drain hoses and sink drain splitters for dishwashers
- Cable, breakers and earthed sockets for water heaters, hobs and dishwashers
- Water heater brackets, TV brackets, washer stands
- Dryer stacking kits matching the maker's part number
- Range hood ducting, elbows, adaptors and rain caps; core drilling where permitted
- Stone cut-outs and tap holes; patching an old cut-out is quoted after a look
- New water pipes or a moved valve
- Quoted as a separate line in the same quote when there is no supply or drain at the spot.
- New cable, socket or breaker
- Quoted in advance and done in the same visit when the circuit is too small or there is no dedicated socket.
Installation, testing and the Up Report
Appliances are installed to the maker's instructions. Each one is tested with you before hand-over; anything not right is fixed on the spot or noted in the Up Report with the next step.
- Unboxing with you, checking accessories and condition; anything unusual is photographed before installation
- Washer: transit bolts removed (front-loaders), levelled, short cycle run to check fill, drain and joints
- Purifier: every joint checked for leaks, first water flushed as the maker advises
- Water heater: filled with water before power is switched on; safety valve, earth-leakage breaker and earth checked
- Range hood: every speed and the light tested, duct joints checked
- Hob: each zone tested with an induction pan; dishwasher: fill and drain tested
- Up Report: before and after photos, model numbers, parts used, basic use and care notes
Written by the UpClean editorial team, reviewed by Trần Nguyễn Hữu Nhật — Founder of UpClean.











