Ceiling fan installation prices
Labour per fan, for ceilings up to 3.5 m. Hooks, rods, cable, trunking and switches are materials, quoted before work; nothing extra is needed if a hook and power point are already in place.
A fan is only fitted to a hook or rod fixed into concrete. Rewiring the main circuit or chasing walls is quoted after a survey.
| Job | Labour |
|---|---|
| Ceiling fan, concrete or timber ceiling with hook and power | from 450,000 VND |
| Ceiling fan with light (extra light wiring, remote receiver) | from 600,000 VND |
| Ceiling fan, plasterboard ceiling anchored to the slab | from 650,000 VND |
| Ceiling above 4 m (long ladder or scaffold) | surveyed and quoted separately; scaffolding, if needed, at cost |
| Old ceiling fan removal | from 300,000 VND |
| Surface power cable in trunking to a new point | from 250,000 VND |
| Wall switch, speed control or controller | from 200,000 VND |
| Hooks, rods, cable, trunking | Materials, quoted before work |
Fan repair prices
Diagnosis with a written quote costs 150,000 VND, deducted from the repair if you go ahead. Prices below are labour; parts such as capacitors, bearings, boards and remotes are quoted before replacement and photographed in your Up Report.
| Job | Labour |
|---|---|
| Diagnosis and written quote | 150,000 VND (deducted from the repair) |
| Standing or wall fan: switch, cable, timer | from 180,000 VND |
| Standing or wall fan capacitor | from 180,000 VND |
| Standing or wall fan bearings | from 250,000 VND |
| Ceiling fan wobble or noise: balancing, tightening, dampers | from 300,000 VND |
| Ceiling fan capacitor | from 250,000 VND |
| Ceiling fan bearings (taken down and refitted) | from 450,000 VND |
| Control board, remote receiver or panel | from 350,000 VND |
| Motor rewinding | from 450,000 VND |
Safe ceiling fan installation
A ceiling fan is heavy and vibrates constantly, so the fixing matters more than the fan. These points are checked before fitting; anything not met is quoted with a solution first.
- Load-bearing hook
- A steel hook or rod fixed with metal anchors into the concrete slab, a beam or a solid timber joist. A hook left by the builder is still checked for strength and rust.
- Plasterboard needs anchoring
- Plasterboard and its frame cannot carry a fan's weight and vibration. A rod goes through a small hole into the slab above; the ceiling only covers the canopy.
- Clearance
- Blades ideally about 2.3 m above the floor, never much below 2.1 m, and roughly 25–30 cm below the ceiling, clear of walls, tall wardrobes and pendant lights.
- Balanced blades
- Blade screws are tightened evenly and the blades balanced if the fan still wobbles; a smooth fan is easier on its hook and shaft.
- Power and breaker
- A properly sized cable from its own switch, in trunking or conduit, with the breaker off during connection. New power points or a consumer unit check are handled by our handyman service.
Common fan faults and fixes
- Rattling
- Loose blade or canopy screws, dry or worn bearings. Tightening and balancing from 300,000 VND; ceiling fan bearings from 450,000 VND.
- Wobbling
- Unbalanced or bent blades, worn dampers or a weak hook; from 300,000 VND. Stop using the fan if the hook sags.
- Running slow
- Usually a weak capacitor or dry bearings. Capacitor labour from 180,000 VND for standing fans, from 250,000 VND for ceiling fans.
- Won't start
- No power, a failed switch or speed control, a dead capacitor or a burnt motor. Motor rewinding from 450,000 VND; you are told if it is not worth it.
- Remote not responding
- Batteries and pairing checked first; a failed receiver or board from 350,000 VND, parts extra.
- Burning smell or sparks
- Switch off at the breaker and do not restart; message us on WhatsApp +84 773 521 104.
Written by the UpClean editorial team, reviewed by Trần Nguyễn Hữu Nhật — Founder of UpClean.










